Make cake mix following directions on box (or, make your own cake recipe). For a two-colored checkerboard effect, separate the batter equally between two medium bowls. For the cake in this tutorial, I left half the batter plain yellow and put a couple of teaspoons of black food coloring and about a tablespoon of cocoa powder in the other half, mixing well.
Bake the plain and “chocolate” batters in separate 6″ inch cake pans (or take turns, bake the first cake and then the second if you only own one pan), about 35-40 minutes at 350F. Check for doneness. These are “taller” cakes and need to bake a little longer than what is directed on the box.
Remove from oven and place pans on a wire rack to cool. Flip cakes onto rack after 10 minutes and let cool completely. Then cut the domes off the tops of cakes. Halve each cake into two equal layers using a sharp, serrated knife. You will end up with four cake layers: two plain and two chocolate.
Position the different sized cutters on top of a cake layer. Place larger cutter about an inch from the edge, and then the smallest cutter “inside” — also about an inch all around from the large cutter. Make sure cutters are centered and evenly placed from each other (see photo for reference).
Gently press down on cutter until cake is cut; lift slowly and remove the cake piece. Set aside. Repeat with the next cutter. You will have 3 concentric circles from one cake layer. (If you use an object other than a cutter as a guide, you will want to use a knife to trace and cut into the cake to form the circle). Repeat this cutting process for the remaining cakes.
Now comes the fun part! You will alternate the colors for each layer, creating a sort of “target.” From the outside going in, your layers should be assembled as followed: yellow cake (outside circle), chocolate cake (middle), yellow cake (center)chocolate cake (outside circle), yellow cake (middle), chocolate cake (center)
You will have two each of the different designs.Note: This step is easily accomplished if you start your layers on a cake plate or stand. Assemble the first layer. Cover and spread frosting on this layer. Now assemble second layer which will have the opposite colors. Ex: if your first layer’s outer circle is plain cake, the second layer’s outer circle will be chocolate. Repeat with other layers, alternating the colors. Don’t forget to frost between each layer! After you’re done stacking, apply a crumb coat to the cake. Stick in fridge for 15 minutes to chill, then apply the final coat of frosting. That’s it! When the first slice is cut, guests will wow at the checkerboard design inside.